Skip to main content
Lanternway Outdoor LightingPlan My Lighting

Landscape Lighting in Dallas

Trees, beds and lawn edges disappear the minute the sun goes down. Landscape lighting puts them back on stage, and it also means fewer dark corners near the house.

Landscape lighting in Dallas is mostly low-voltage LED. A transformer plugged into an outdoor outlet steps power down to 12 volts, and buried cable feeds uplights, bed lights and path lights. HomeGuide reports $80 to $300 per fixture installed. Use the form and we pass your request to an independent local pro for an on-site quote.

Plan My Lighting Areas we light

Plan your lighting

One independent lighting company gets your request. Free and no obligation. How referrals work

Who landscape lighting is for

Homeowners who sit outside after dark, people with a tree or bed they are proud of, and anyone who comes home late to a black front yard. It also suits houses where the porch light alone leaves the walk and the side yard in shadow. If your goal is mainly the house wall itself, look at architectural lighting too.

Signs your yard needs it

  • The front of the house looks fine by day and vanishes at night.
  • A mature tree is the best feature of the lot, and nobody sees it after dinner.
  • An old halogen system has dead fixtures, green corrosion or a transformer that hums.
  • Guests miss the step at the edge of the drive.
  • You keep the porch light burning all night because nothing else is lit.

Fixture types you will hear about

  • Uplights. Placed at the base of a tree or wall and aimed up. The workhorse of most designs.
  • Downlights. Mounted high in a tree and aimed down, so light filters through branches like moonlight.
  • Well lights. Set flush in the ground, handy near lawns where mowers pass.
  • Wash and bed lights. Wide, soft beams across shrubs and groundcover.
  • Path lights. Short posts that throw light down onto a walk. More on these on our patio and pathway lighting page.

What is involved: a five-step process

  1. Night walk and design. The pro looks at what you want to feature, where the outlets are and where wire can run without crossing a driveway.
  2. Locate utilities. Texas811 says state law requires you or your contractor to contact 811 two business days before digging. Ask who makes that call.
  3. Set the transformer. It mounts near an outdoor outlet. If no outlet exists, a licensed electrician adds one.
  4. Run cable and place fixtures. Direct-burial cable goes under mulch or into a narrow, shallow slit in the turf, and each fixture is staked and aimed.
  5. Aim, time and walk through. Final aiming happens after dark. The pro sets the photocell or timer and shows you how it works.

Landscape lighting cost

These are published national ranges. The real number comes from the pro's on-site look.

ItemRange reportedSource
Uplight or in-ground light, installed$50 to $350 eachHomeGuide
Path light, installed$50 to $150 eachHomeGuide
Low-voltage light, per fixture$100 to $150Angi
Transformer, installed$200 to $500HomeGuide
Labor and wiring per light$30 to $100HomeGuide
Trenching$5 to $12 per linear footHomeGuide
Whole project (most homes)$3,000 to $6,000Angi

Fixture material moves price more than people expect. HomeGuide notes that plastic and aluminum cost less than steel, copper or brass. See the full outdoor lighting cost guide for what else drives a quote.

Licensing in plain words

On its list of electrician licensing exemptions, TDLR includes landscapers who do electrical work on low-voltage exterior lighting, but it excludes power sources. In practice, the 12 volt fixtures and cable can be installed by a lighting or landscape pro. The outlet or circuit that feeds the transformer is electrical work for a licensed electrician. The same TDLR page warns that local rules can override these exemptions.

What to ask the pro

  • Is the transformer sized with room to add fixtures later?
  • What wire gauge and layout do you use to keep the far fixtures as bright as the near ones?
  • Are the fixtures brass, copper or aluminum, and what warranty comes from the maker?
  • Who handles the 811 call?
  • Will you add an outlet yourself, or bring in a licensed electrician?
  • Can I see the layout at night before you bury the cable?

Areas we cover for landscape lighting

Outdoor lighting questions

How deep is landscape lighting cable buried?

Low-voltage cable is usually laid shallow, under mulch or in a thin slit in the turf, not in a deep trench. Ask the pro how deep they bury it and whether they map the runs, so a future planting job does not cut it.

Can my old halogen landscape lights be converted to LED?

Often, yes. Some fixtures accept LED lamps, while worn or corroded ones are better replaced. The transformer may also need a check, since LED loads are much smaller.

Should landscape lights point up into trees or down from them?

Both work. Uplighting shows the trunk and canopy shape. Downlighting from high branches gives a softer, moonlit look and less glare. Many designs use some of each.

Do landscape lights bother wildlife or neighbors?

They can if aimed carelessly. DarkSky-style guidance says aim light down or shield it, use the lowest useful brightness and put lights on a timer. A good pro aims nothing into a neighbor's windows.