Skip to main content
Lanternway Outdoor LightingPlan My Lighting

Architectural Lighting for Dallas Homes

A house with nice brick, stone or columns deserves more than one porch fixture. Architectural lighting is the work of lighting the structure itself so it reads clearly from the street at night.

Architectural lighting means fixtures aimed at the home: uplights grazing a facade, small downlights in the eaves over columns and the entry, and soft washes on large walls. Some fixtures are low voltage and some are 120 volt. Request an estimate and an independent local pro will look at your house and quote it.

Plan My Lighting Areas we light

Plan your lighting

One independent lighting company gets your request. Free and no obligation. How referrals work

What gets lit, and why

  • Facade grazing. A fixture placed close to a textured wall throws light almost straight up, so every mortar line and stone edge casts a small shadow. It flatters brick and stone.
  • Eave downlights. Small lights mounted in the soffit point down at the wall, columns or garage. Done with restraint, they frame the house like a stage.
  • Columns and entry. A pair of lights on the columns or a soft wash over the front door tells guests where to go.
  • Gables and peaks. A single narrow beam can pick out a peak or a window feature without lighting the whole wall.

Pair this with landscape lighting for the trees in front, and the house and yard read as one picture.

Signs it is time

  • Photos of your home at night show a dark box with a lit porch.
  • Floodlights on the corners light the lawn and the neighbor's bedroom but not the house.
  • You added stone or new brick and want it seen.
  • The entry is hard to find for delivery drivers and guests.

Line voltage, low voltage and who does what

Ground-mounted uplights are often low voltage and can share a transformer with yard lights. Fixtures in the soffit may be either type. Angi advises leaving soffit lighting to a pro. Once the job means 120 volt wiring, a new outlet or a new circuit, you are in electrical work. TDLR's electrical licensing FAQ says anyone who performs electrical work in Texas must be licensed, unless exempt. The City of Dallas permit guide adds that most electrical permits must be obtained by a contractor registered as an electrical contractor with the city.

A five-step process

  1. Study the house at dusk. The pro looks at textures, rooflines and windows, and notes where glare could spill inside.
  2. Plan fixture types and beam angles. Narrow beams for columns, wider ones for walls, shielded heads near windows.
  3. Sort out power. Low-voltage fixtures go on a transformer. Any 120 volt work goes to a licensed electrician.
  4. Install and wire. Ground fixtures are staked and cabled. Eave fixtures are cut in or surface mounted, depending on the soffit.
  5. Aim at night and set controls. Final aiming happens after dark, then the timer or photocell is set.

Architectural lighting cost

Ranges below are national figures reported by cost guides. A pro's on-site look sets the real price.

ItemRange reportedSource
Soffit light, per fixture$125 to $300Angi
Uplight, per fixture$100 to $400Angi
Spot or downlight, installed$100 to $400HomeGuide
Floodlight, per fixture$250 to $800Angi
New outdoor outlet, installed$180 to $350HomeGuide
Electrician labor, hourly$50 to $130HomeGuide

Our outdoor lighting cost guide covers how to compare quotes line by line.

Keep it easy on the eyes

The best facade lighting is quieter than people expect. A house lit evenly from corner to corner looks flat. A few well placed beams, with some wall left in shadow, give depth and make the lit parts look intentional. DarkSky International asks for light that is targeted, low level and warm colored. For a house, that means shielded fixtures, no beams into windows across the street and a warm white instead of a blue one.

Questions for the pro

  • Which fixtures are low voltage, and which need an electrician?
  • Will you cut into the soffit, and how is it sealed afterward?
  • What color temperature do you suggest for my brick or stone?
  • How do you keep light out of my upstairs windows and the neighbors'?
  • Is a City of Dallas permit needed for any part of this?

If you also want light on the front walk or back patio, see patio and pathway lighting.

Areas we cover for architectural lighting

Outdoor lighting questions

What is wall grazing in exterior lighting?

Grazing places a fixture a short distance from a textured wall and aims it nearly straight up. The low angle makes brick and stone texture pop. On smooth stucco it can show every flaw, so pros often use a wider wash there.

Are eave lights better than floodlights on the corners?

For looks, usually. Eave downlights put soft light on the wall and columns, while corner floods spray light across the yard. Floods still have a place for security near a side gate or garage.

Can architectural lights share a transformer with my yard lights?

If both are low voltage, often yes, as long as the transformer has the capacity. The pro adds up the fixture load and leaves some room to grow.

Will lighting the house make my bedrooms bright at night?

It should not. Careful aiming, shielded fixtures and beam angles that stop below window lines keep light on the wall. Say in your request if this worries you.